CVE-2022-48818

In the Linux kernel, the following vulnerability has been resolved:

net: dsa: mv88e6xxx: don't use devres for mdiobus

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The mv88e6xxx is an MDIO device, so the initial set of constraints that
I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the Marvell switch driver on shutdown.

systemd-shutdown[1]: Powering off.
mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down
fsl-mc dpbp.9: Removing from iommu group 7
fsl-mc dpbp.8: Removing from iommu group 7
------------[ cut here ]------------
kernel BUG at drivers/net/phy/mdio_bus.c:677!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15
pc : mdiobus_free+0x44/0x50
lr : devm_mdiobus_free+0x10/0x20
Call trace:
 mdiobus_free+0x44/0x50
 devm_mdiobus_free+0x10/0x20
 devres_release_all+0xa0/0x100
 __device_release_driver+0x190/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x4c/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x94/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_device_remove+0x24/0x40
 __fsl_mc_device_remove+0xc/0x20
 device_for_each_child+0x58/0xa0
 dprc_remove+0x90/0xb0
 fsl_mc_driver_remove+0x20/0x5c
 __device_release_driver+0x21c/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_bus_remove+0x80/0x100
 fsl_mc_bus_shutdown+0xc/0x1c
 platform_shutdown+0x20/0x30
 device_shutdown+0x154/0x330
 kernel_power_off+0x34/0x6c
 __do_sys_reboot+0x15c/0x250
 __arm64_sys_reboot+0x20/0x30
 invoke_syscall.constprop.0+0x4c/0xe0
 do_el0_svc+0x4c/0x150
 el0_svc+0x24/0xb0
 el0t_64_sync_handler+0xa8/0xb0
 el0t_64_sync+0x178/0x17c

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The Marvell driver already has a good structure for mdiobus removal, so
just plug in mdiobus_free and get rid of devres.